Air Products Home

News ReleaseNew Reporting Guidelines Put Pressure On Solvent-Using Industries, Says Air Products

June 30, 2005 Lehigh Valley, Pa.

New environmental reporting guidelines, published by the Department of Food and Rural Affairs, will add to pressure on solvent-using industries to maximise the efficiency of emissions control systems, says Air Products.

The proposed guidelines, based on identified key performance indicators, are set out in a consultation paper and companies have been asked to respond by 19 th September 2005. The guidelines are intended to help businesses to report on their environmental impact but, if they are not widely adopted, further regulation may follow.

As one of the 25 direct key performance indicators, all emissions of volatile organic compounds (VOCs) should now be reported by UK businesses, regardless of whether they are listed as public companies. This means more businesses will need to report on their environmental impact for the first time.

Luc Rijnbeek, Commercial Manager Environmental Cryogenics, comments:

"Many solvent-using industries in the chemicals and pharmaceuticals sectors are reviewing their existing emissions control systems - looking for ways to minimise solvent consumption and reduce emissions levels.

"These new reporting guidelines will further add to this pressure and will encourage companies to look for technologies that will enable them to meet legislative targets. Cryogenic emissions control technology is a highly efficient solution and flexible enough to operate even at low gas flow rates, below 300 Nm³/h."

Cryogenic condensation technology has been used to recover solvent emissions from process gas streams since the early 1980s and has achieved recognition for its efficiency and its suitability for major scale applications, where large volumes of solvents are used.

Since then the technology has evolved and the new generation systems operate more flexibly, even where there are very low flow rates and a relatively high solvent loading. Using these new systems it is even possible to recover the solvents from the waste gas stream in a pure form so they can be reused or resold, so enhancing their overall sustainability.

Luc Rijnbeek comments:

"Today's cryogenic emissions recovery systems are designed to meet the needs of each individual plant. For some the original cryogenic condensation technology, which was built to cope with high volumes, is the most appropriate, but where flexibility and high concentrations at low flow rates are a consideration, the new cryogenic systems will optimise efficiency."

Solvent-using industries are also preparing to meet the new emissions limits established as part of the EU Solvent Emissions Directive, which they will need to comply with fully by the end of October 2007. These industries can apply for the reduction scheme, which will enable them to reduce emissions levels over a pre-agreed extended time period, but the deadline for these applications is the end of October 2005.

For more information about cryogenic condensation technology, contact Air Products on 0800 3890202, visit or email

Note to the Editor:
Air Products (NYSE:APD) serves customers in technology, energy, healthcare and industrial markets worldwide with a unique portfolio of products, services and solutions, providing atmospheric gases, process and specialty gases, performance materials and chemical intermediates. Founded in 1940, Air Products has built leading positions in key growth markets such as semiconductor materials, refinery hydrogen, home healthcare services, natural gas liquefaction, and advanced coatings and adhesives. The company is recognized for its innovative culture, operational excellence and commitment to safety and the environment and is listed in the Dow Jones Sustainability and FTSE4Good Indices. The company has annual revenues of $7.4 billion, operations in over 30 countries, and nearly 20,000 employees around the globe. For more information, visit

Connect with us on:

An error has occured, please fix the highlighted fields.
To request a quote or for more information about Air Products, please fill out the form below, and an Air Products representative will contact you shortly.
Please use the form below to contact us.

What can we answer for you?

  1. What kind of inquiry?

If you would prefer to contact us by phone, you can call any of our Air Products locations worldwide by visiting Worldwide Locations & Phone Numbers.


This site uses cookies to store information on your computer. Some are essential to make our site work; others help us to better understand our users. By using the site, you consent to the placement of these cookies. Read our Legal Notice to learn more.