I have measured the oxygen level in my continuous furnace, and it's low, but my parts still come out oxidized. Why?
← Back to Sintering and Powder Metals
||Don Bowe |
Sr. Applications Engineer
||Guido Plicht |
Senior Research Engineer
This is a question that comes up frequently. When troubleshooting for oxidation in a continuous furnace atmosphere, it's important to measure both oxygen level and dew point. Here's why.
The dew point is a measure of the moisture content of a gas and is the temperature at which water vapor in a sample gas starts to condense. Oxygen concentration is simply that—a measure of the partial pressure of oxygen.
When a gas sample is extracted from the hot zone of a furnace for analysis, reactive gases like H2, CO, or CxHy have already combined with any O2 present to produce moisture and other gaseous components. As a result, depending on the furnace temperature and how the sample is obtained, your analyzer will often display a low oxygen level. In most applications, a low oxygen level and a low dew point are required to control the process and prevent oxidation. Click here to find the Gas Atmosphere Analysis Guidelines
For further details contact Shawn Lainchbury tel: +44 (0) 1932 249 398