Photovoltaics (Solar) Resource Center

Events

At this time there are no events.

Your Journey previous links

How can I prevent copper filler metal from spreading away from the brazed joints in my steel parts? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > How do I know if I’m wasting gas due to leaks in my gas piping? > How do I calculate the amount of methanol I'll need for my carburizing atmosphere? > My ceramic carrier tiles are deteriorating faster than expected. Could my atmosphere be affecting it? > Why is control necessary for a protective atmosphere? > I know my flowmeter tells me that I have a certain gas flow rate, but how can I be sure? > I use high-pressure gas cylinders and am concerned about safety. Is there a better way? > How can I identify the stain or discoloration on my part after a heat treating process? > I’m experiencing intermittent oxidation in my furnace. Could leaks in the nitrogen houseline be the problem? > Is it true that NFPA 86C has changed? > What nitrogen purity do I need for my heat treatment process? > When does on-site nitrogen generation make sense versus liquid nitrogen delivery? > Can I determine where the oxidation on my heat treated parts is coming from within my furnace? > I have measured the oxygen level in my continuous furnace, and it's low, but my parts still come out oxidized. Why? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > My sintered PM parts come out of the furnace "sooty." How do I prevent this? > How do I know if I’m wasting gas due to leaks in my gas piping? > Would it help to add oxygen to my cupola? If so, how should it be added? > I know my flowmeter tells me that I have a certain gas flow rate, but how can I be sure? > I use high-pressure gas cylinders and am concerned about safety. Is there a better way? > Is it true that NFPA 86C has changed? > How can I reduce my gas consumption for molten metal blanketing? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > How do I know if I’m wasting gas due to leaks in my gas piping? > Why do people use oxygen for combustion when air is free? > What’s the best approach to select the hydrogen concentration for our nitrogen-hydrogen atmosphere for bright annealing of steels? > How can I address a cooling issue within my process? > We anneal and passivate 300 series stainless tube and sometimes get a “grey” coloration on the ID—can we keep it bright? > How can I benefit from a nitrogen-based system if I’m already getting good parts at a reasonably low cost? > My ceramic carrier tiles are deteriorating faster than expected. Could my atmosphere be affecting it? > What are some considerations to properly select a vacuum furnace surge tank? > Why is control necessary for a protective atmosphere? > Can we conserve energy and increase savings by converting to a synthetic nitrogen/hydrogen atmosphere? > Why would I want to cryogenically treat tool steels? Does it really affect the microstructure? > How can I provide customer documentation proving my heat treat process was controlled while treating their products? > What is dezincification and how does it apply to thermal processing of brass? > Can nitrogen reduce costs and improve operations in my dissociated ammonia (DA) atmosphere? > I know my flowmeter tells me that I have a certain gas flow rate, but how can I be sure? > I use high-pressure gas cylinders and am concerned about safety. Is there a better way? > How can I identify the stain or discoloration on my part after a heat treating process? > How can I increase production flexibility and ensure the quality of my annealed components? > I’m experiencing intermittent oxidation in my furnace. Could leaks in the nitrogen houseline be the problem? > I have measured the oxygen level in my continuous furnace, and it's low, but my parts still come out oxidized. Why? > How can we minimize infiltration of oxygen into open-ended continuous furnaces? > Is it true that NFPA 86C has changed? > What nitrogen purity do I need for my heat treatment process? > Which nitrogen supply makes sense—on-site generation or liquid delivery? > Can I determine if the oxidation in the cooling section of my continuous furnace is caused by air ingress or a water leak? > Can I determine where the oxidation on my heat treated parts is coming from within my furnace? > What causes discoloration and oxidation of stainless steels in brazing, sintering or annealing processes? > How can I reduce my costs for Al-annealing without reducing my quality? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > What cooling rate do I need for my sinter hardening process? > What causes stainless steel to turn green in a continuous belt furnace? > Can the increased temperature variability in my annealing furnace be causing the ductility variations in my product? > For our vacuum furnace, how can we get adequate gas pressure to quench at pressures up to 20 bar? > I know my flowmeter tells me that I have a certain gas flow rate, but how can I be sure? > How can I lower the carbon monoxide levels in my steelmaking furnace off-gas? > Is it true that NFPA 86C has changed? > When does on-site nitrogen generation make sense versus liquid nitrogen delivery? > How can I optimize melting of contaminated metal scrap? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > How do I know if I’m wasting gas due to leaks in my gas piping? > Why do people use oxygen for combustion when air is free? > How can I address a cooling issue within my process? > How can I provide customer documentation proving my heat treat process was controlled while treating their products? > I know my flowmeter tells me that I have a certain gas flow rate, but how can I be sure? > I use high-pressure gas cylinders and am concerned about safety. Is there a better way? > I’m experiencing intermittent oxidation in my furnace. Could leaks in the nitrogen houseline be the problem? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > How do I know if I’m wasting gas due to leaks in my gas piping? > I know my flowmeter tells me that I have a certain gas flow rate, but how can I be sure? > I’m experiencing intermittent oxidation in my furnace. Could leaks in the nitrogen houseline be the problem? > Is it true that NFPA 86C has changed? > When does on-site nitrogen generation make sense versus liquid nitrogen delivery? > How can I optimize melting of contaminated metal scrap? > How can I reduce my gas consumption for molten metal blanketing? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > How do I know if I’m wasting gas due to leaks in my gas piping? > Why would I want to cryogenically treat tool steels? Does it really affect the microstructure? > How can I provide customer documentation proving my heat treat process was controlled while treating their products? > I know my flowmeter tells me that I have a certain gas flow rate, but how can I be sure? > Our gas quenching process uses a lot of gas and then vents it. Can we purify and reuse that gas? > I use high-pressure gas cylinders and am concerned about safety. Is there a better way? > I’m experiencing intermittent oxidation in my furnace. Could leaks in the nitrogen houseline be the problem? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > How do I know if I’m wasting gas due to leaks in my gas piping? > We anneal and passivate 300 series stainless tube and sometimes get a “grey” coloration on the ID—can we keep it bright? > How can I avoid decarburisation in my sintering process? > My ceramic carrier tiles are deteriorating faster than expected. Could my atmosphere be affecting it? > Why is control necessary for a protective atmosphere? > How can I provide customer documentation proving my heat treat process was controlled while treating their products? > How can I extend the life of stainless steel belts used in our continuous sintering furnaces? > I know my flowmeter tells me that I have a certain gas flow rate, but how can I be sure? > I use high-pressure gas cylinders and am concerned about safety. Is there a better way? > I’m experiencing intermittent oxidation in my furnace. Could leaks in the nitrogen houseline be the problem? > How can I maintain consistent properties among my sintered powder metal parts? > I have measured the oxygen level in my continuous furnace, and it's low, but my parts still come out oxidized. Why? > Q and A > Is it true that NFPA 86C has changed? > What nitrogen purity do I need for my heat treatment process? > When does on-site nitrogen generation make sense versus liquid nitrogen delivery? > What is the optimum atmosphere system for furnace brazing stainless steel components? > Can I determine if the oxidation in the cooling section of my continuous furnace is caused by air ingress or a water leak? > How can I reduce the cost of my sintering process without compromising quality or reliability? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > My sintered parts have a frosty, dull, matte finish. What causes this and how can I prevent it? > My sintered PM parts come out of the furnace "sooty." How do I prevent this? > What causes stainless steel to turn green in a continuous belt furnace? > Q and A > How can I address a cooling issue within my process? > How can I provide customer documentation proving my heat treat process was controlled while treating their products? > I know my flowmeter tells me that I have a certain gas flow rate, but how can I be sure? > Could gas purity be the reason for the variability in my thermal spray coating density, hardness and adhesion? > I use high-pressure gas cylinders and am concerned about safety. Is there a better way? > How does hydrogen compare to traditional hydrocarbon fuels for my HVOF operation? > I’m experiencing intermittent oxidation in my furnace. Could leaks in the nitrogen houseline be the problem? > Can I remotely monitor what’s happening in my furnaces and other process equipment while I’m away from my plant? > How do I know if I’m wasting gas due to leaks in my gas piping? > Do you need to weld titanium in a glovebox? What are some of the gas considerations? > Gas-Metal Interactions e-Newsletter Archives > What Our Customers Say About Us > Read What Our Customers Say About Us > Read What Our Customers Say About Us > Articles & Publications > Events > Articles & Publications > FAQs > Articles & Publications > Events > Whitepapers > We Understand Steel > Mining > Applications > Ask the Experts: Paints/Coatings > Applications > Resource Center > Personal Care > Pharmaceuticals/Biotechnology > Photovoltaics (Solar) > Crystalline > III/V Solar Cells > Ingot/Wafering > Polysilicon > Thin Film > Resource Center > Events

next links

Expand/Collapse Quick Links by Audience

Quick Links by Audience

For Customers
APDirect Customer Portal
MSDS Library
Gas Facts
Sample Requests
FDA Letters
Customer Support Overview
Distributor Services Gases U.S.
Technology Licensing
Worldwide Locations & Contacts
ISO 9001 Certifications

For the Press
News Center
Executive Bios
Photo Library
RSS
For Investors
Stock Information
Earnings Releases
Company History

For Suppliers
APDirect Customer Portal
General Conditions of Purchase
What We Buy
eConnections
Worldwide Locations & Contacts

For Potential Employees
Search Job Openings
Company History
Corporate Citizenship
Why Air Products
Diversity and Inclusion

RSS Feed | Twitter | YouTube | LinkedIn | Legal Notice | Copyright © 1996 – 2012 Air Products and Chemicals, Inc.

Air Products Worldwide

Belgium-Dutch
Belgium-Fr
Brazil
Canada
China
Czech Rep
France
Germany
Hong Kong

Hungary
India
Indonesia
Ireland
Israel
Italy
Japan
Korea
Malaysia

Mexico
Netherlands
Norway
Poland
Portugal
Russia
Singapore
Slovakia
South Africa

Spain
Taiwan
Thailand
UAE
UK
USA

Contact Us | Customer Support

Company

Company Overview
News Center
Governance
Sustainability
Supplier Information
Technology Partnerships

Air Products History

Company History

2011 Sustainability Report

Products Overview
Gases
Chemicals
Equipment
Services and Solutions

hydrogen fuel

Air Products offers fully-integrated hydrogen fueling stations

Defoamer Selector Tool

New Defoamer Selector Tool

Already know what product you need?

Industries Overview

Select an Industry:

Adhesives/Sealants/Composites
Agriculture
Analytical Laboratories
Chemical Processing
- Fine/Specialty Chemicals
- Petrochemicals
Construction
Electronics Assembly
Energy

Flat Panel Displays (TFT/LCD)
Food/Beverage
Glass/Minerals
Graphic Arts
Healthcare
- Hospitals/Institutions
Industrial/Institutional Cleaning
Leisure/Recreation
Metals
Mining
Paints/Coatings

Personal Care
Pharmaceuticals/Biotechnology
Photovoltaics (Solar)
Polyurethanes
Rubber/Plastics
Semiconductors
Transportation
Water and Wastewater

Investors Overview
Stock Information
Earnings and Presentations
Financial Information
Annual Reports
SEC Filings
Shareholder Services
Teleconference Information

2011 Annual Report

2011 Annual Report

Earnings Release

Earnings Releases

Careers

Careers Overview
Our Hiring Process
Why Air Products
Experienced Professionals
Search Job Openings
University Recruiting U.S.
Graduate Recruiting Europe

View Our Career Center

View Our Career Center

Working for Air Products

What people are viewing most:

Semiconductors
Industrial/Institutional Cleaning
Hydrogen Energy