Air Products Home

Burners

Product NameDescription/BenefitsDownloads

Cleanfire® AOFi™ Burners

Similar to the Cleanfire AOF burner, but available in sizes ranging from 1 to 20+ MM Btu/hr.

Similar to the Cleanfire AOF burner, but available in sizes ranging from 1 to 20+ MM Btu/hr.

Cleanfire® AOF™ Burners

This is an air-oxy-fuel burner that serves as a back-up technology to the Cleanfire HR burner and/or as a primary burner to deliver differentiated flame characteristics. A variety of fuels can be fired as well as oxidizer gas with a wide range of oxygen content, from air to pure oxygen. The burner helps enable self-sufficiency in emergency situations, and helps to protect the furnace asset, especially when fused cast refractory superstructure exists. Available in sizes ranging from 2 to 20+ MM Btu/hr.

This is an air-oxy-fuel burner that serves as a back-up technology to the Cleanfire HR burner and/or as a primary burner to deliver differentiated flame characteristics. A variety of fuels can be fired as well as oxidizer gas with a wide range of oxygen content, from air to pure oxygen. The burner helps enable self-sufficiency in emergency situations, and helps to protect the furnace asset, especially when fused cast refractory superstructure exists. Available in sizes ranging from 2 to 20+ MM Btu/hr.

Cleanfire® Gen.1 Burners

This burner is the workhorse of the industry with well over 1,000 installed for full conversions and oxy-fuel boosting applications. Burners range from 1 up to 20+ MM Btu/hr and can be fired with gas, oil, or propane. The non-water-cooled tube in-tube design is very rugged and virtually maintenance free.

This burner is the workhorse of the industry with well over 1,000 installed for full conversions and oxy-fuel boosting applications. Burners range from 1 up to 20+ MM Btu/hr and can be fired with gas, oil, or propane. The non-water-cooled tube in-tube design is very rugged and virtually maintenance free.

Cleanfire® HRi™ Burners

These are the most efficient flat-flame, "high-radiation" oxy-fuel burners. They use a low-momentum, high-aspect-ratio flame design to maximize the radiation delivered to the glass. Proprietary staging technology allows exact flame shaping, minimizes emissions, reduces maintenance, and delivers the lowest cost per ton of glass melted. Additionally, the technology offers higher per burner turn-down capability and lower fluid inlet pressure requirements. The "HRi" technology is available in gas and oil versions. Available in sizes ranging from 0.25 to 20+ MM Btu/hr.

These are the most efficient flat-flame, "high-radiation" oxy-fuel burners. They use a low-momentum, high-aspect-ratio flame design to maximize the radiation delivered to the glass. Proprietary staging technology allows exact flame shaping, minimizes emissions, reduces maintenance, and delivers the lowest cost per ton of glass melted. Additionally, the technology offers higher per burner turn-down capability and lower fluid inlet pressure requirements. The "HRi" technology is available in gas and oil versions. Available in sizes ranging from 0.25 to 20+ MM Btu/hr.

Cleanfire® HR™ Burners

These are very efficient flat-flame, "high-radiation" oxy-fuel burners. They use a low-momentum, high-aspect-ratio flame design to maximize the radiation delivered to the glass. Proprietary staging technology allows exact flame shaping and minimizes emissions. The "HR" technology is available in gas and oil versions. Available in sizes ranging from 1 to 20+ MM Btu/hr.

These are very efficient flat-flame, "high-radiation" oxy-fuel burners. They use a low-momentum, high-aspect-ratio flame design to maximize the radiation delivered to the glass. Proprietary staging technology allows exact flame shaping and minimizes emissions. The "HR" technology is available in gas and oil versions. Available in sizes ranging from 1 to 20+ MM Btu/hr.

Cleanfire® ThruPort™

This oxygen-staged oxy-fuel burner helps enable on-the-fly installation of oxy-fuel technology through existing air-fuel regenerative furnace ports. This water-cooled burner enables glassmakers to regain control of furnaces with regenerative system failures. It delivers furnace campaign extension and enables implementation of the on-the-fly Cleanfire HGM – Hybrid Glass Melter operating system. The burners are available in sizes ranging from 1 to 20+ MM Btu/hr.

This oxygen-staged oxy-fuel burner helps enable on-the-fly installation of oxy-fuel technology through existing air-fuel regenerative furnace ports. This water-cooled burner enables glassmakers to regain control of furnaces with regenerative system failures. It delivers furnace campaign extension and enables implementation of the on-the-fly Cleanfire HGM – Hybrid Glass Melter operating system. The burners are available in sizes ranging from 1 to 20+ MM Btu/hr.

Oxy-fuel burners

Our proprietary burners provide enhanced luminosity and shorter flames, which can help provide complete combustion and increased overall efficiency.

Our proprietary burners provide enhanced luminosity and shorter flames, which can help provide complete combustion and increased overall efficiency.

X

This site uses cookies to store information on your computer. Some are essential to make our site work; others help us to better understand our users. By using the site, you consent to the placement of these cookies. Read our Legal Notice to learn more.

Close